Honda Civic Exhaust Systems Replacement

1. Jack up your Civic to permit your self room to work beneath the car.
2. Take away the bolts that maintain the muffler to the exhaust B-pipe utilizing a socket wrench.
3. Secure the muffler by putting a secure assist beneath it, equivalent to stacked bricks, or have somebody support it for you with their hands.
4. Pry off the rubber hangers on the muffler, which hold the muffler from falling. In the event you don’t have your muffler supported once you remove the rubber hangers, your muffler will fall to the ground. Take away the muffler and set it aside.
5. Loosen the nuts that hold the B-pipe to the catalytic converter.
6. Secure the exhaust system in the same manner you secured the muffler.
7. Pry off the rubber hangers on the exhaust system, which preserve the exhaust from falling.
8. Remove the exhaust system from beneath your Civic.
9. Jack up your automobile to offer yourself with sufficient room to work underneath it.
10. Align the rubber hangers in your Civic along with your new exhaust system’s B-pipe hangers.
11. Connect the B-pipe to the catalytic converter with the bolts provided with your exhaust system utilizing a socket wrench.
12. Slip the band clamp over the B-pipe within the rear of your exhaust system and then slide the middle exhaust pipe into the clamp.
13. Connect the center pipe to the rubber hangers that grasp above.
14. Slip a second band clamp over the center pipe in the rear of your exhaust system and then slide in the muffler pipe.
15. Attach the muffler to the rubber hangers that grasp above.
16. Align the band clamps so the muffler matches into the muffler part on the rear of your Civic. The muffler section is the semi-circle portion of your bumper that has been minimize out. As soon as the muffler pipe is properly aligned, tight the band clamps using your socket wrench.

Incoming search terms: