Honda Civic Tweeters Installation Procedures

The tweeters in your Honda Civic are audio components that produce the high-pitched sounds coming from your Civic’s audio system.
1. Locate the tweeter assembly in your Honda Civic. These speakers are sometimes very small and are situated within the front of the Civic on the within of the motive force and passenger facet door, near the side mirrors.
2. Place a clean rag over the tip of the flat-tip screwdriver and wedge the tip of the screwdriver below the bezel surrounding the tweeters. Pry up on the bezel to take away it.
3. Take away the two screws that maintain the tweeter in place.
4. Pull the tweeter out of the door panel and pull off the plug-type electrical connectors on the again of the tweeters. They should pull right off. Word the place of the plugs as these characterize constructive and negative leads.
5. Plug the speaker wires into the brand new tweeters. Noting the orientation of the constructive and negative leads, plug the massive electrical wire plug over the large tab on the new tweeters and the small electrical wire plug over the small tab on the tweeter.
6. Turn the ignition to the “II” place and activate the stereo to confirm that the tweeters is working properly.
7. Place the tweeters into the door panel and align the mounting holes to the holes in the door panel.
8. Safe the tweeters to the door panel by inserting the retaining screws by means of the mounting bracket holes on the tweeter and the door panel and tightening the screws.
9. Snap the tweeter’s bezel back into place.

Incoming search terms: